Name: BLUETTI PV200 Solar Panel
Brand: BLUETTI

★★★★☆

Price: $320–$370
Best For: BLUETTI power station owners who want a matching, proven 200W panel.

Pre-order on Amazon: you can order it now, and it ships around November 11, 2026. In-stock alternatives: the Renogy 200W Portable Solar Panel and the Jackery SolarSaga 200W in our Solar Panels reviews.

Watch a Video Review

Key Takeaways

Best for: BLUETTI power station owners
Standout: Proven panel that plugs right into BLUETTI stations
Watch out: Heavier and less efficient than newer 200W panels
Not for: Buyers chasing the lightest panel

The BLUETTI PV200 is a 200W foldable solar panel with up to 23.4% efficient cells and an ETFE coating. It plugs straight into most BLUETTI power stations and sells for about $320 to $370.

What you need before you buy

A BLUETTI power station, or an MC4 adapter for other brands.
A sunny, open spot to set it up.
Room to store it: folded, it is about the size of a large briefcase.

How much it charges

In good sun, roughly 800Wh to 1,100Wh a day, enough to top up a 1kWh station or extend a 2kWh station through a sunny outage.

Not sure it will work with your power station? Read how to match a solar panel to a power station.

How it compares

	BLUETTI PV200	Jackery SolarSaga 200W	ALLPOWERS SE200
Typical price	$320–$370	$379–$429	$139–$189
Rated power	200W	200W (bifacial)	200W
Efficiency	Up to 23.4%	Up to 25%	23–25%
Weight	About 16 lb	14.3 lb	15.8 lb
Best for	BLUETTI owners	Jackery owners	Budget 200W

See my Jackery SolarSaga 200W and ALLPOWERS SE200 reviews.

Want to see other Solar Panels? Compare them side by side →

How I researched this: BLUETTI’s PV200 product page and specs, the Amazon listing, and a video review from Tolbers. Prices checked October 30, 2026.

BLUETTI PV200 Solar Panel

The BLUETTI PV200 is a proven 200W foldable panel that plugs straight into BLUETTI power stations. Here is who it suits.

Product Brand: BLUETTI

Editor's Rating:
4.4

Pros

Up to 23.4% efficient monocrystalline cells
Plugs straight into most BLUETTI power stations, including the Elite 200 V2 we review
Scratch- and splash-resistant ETFE coating
Folds to 22.5 x 23.6 x 2.9 in
Proven panel with years of owner reviews

Cons

Heavier than newer 200W panels at about 16 lb
Older cell tech than 25% N-type rivals
Pricier than the Renogy 200W
Kickstand setup takes some fiddling

Specs

Model	PV200
Rated power	200W
Cells	Monocrystalline, up to 23.4% efficiency
Surface	ETFE coating
Connector	MC4 (BLUETTI solar connector)
Folded size	22.5 x 23.6 x 2.9 in
Weight	About 16 lb
Compatible	BLUETTI EB3A, EB70S, AC2A, AC70, AC180, AC200L, Elite 200 V2, AC300 and more

Verdict

The PV200 is the easy pick if you own a BLUETTI station: it plugs right in and has a long track record. For other brands, the Renogy 200W is lighter, more efficient and cheaper.

Was this helpful?

One tap. Helps us make the site better.

Thanks! We read every message.

Common Questions

Does it work with non-BLUETTI stations?: Yes, with an MC4 adapter, as long as the station accepts the panel's voltage.
How long to charge an Elite 200 V2?: About 10 to 12 hours of good sun with one panel; two panels roughly halve that.
Is it waterproof?: It resists splashes thanks to its ETFE surface, but should not sit in heavy rain.