MRCOOL Easy Pro 12,000 BTU Mini Split Review
4.1out of 5
Typical price
$1,500–$1,650
Best for
Buyers who want the newer refrigerant and have, or will hire, someone with HVAC tools.

Check Price on Amazon

Watch a Video Review

Key Takeaways

  • Best for: Newer refrigerant, semi-DIY
  • Standout: R-454B refrigerant
  • Watch out: Vacuum pump and gauges needed
  • Not for: Fully DIY installs

The MRCOOL Easy Pro is a 12,000 BTU mini split heat pump that uses the newer R-454B refrigerant. Despite the name, the listing says a vacuum pump and gauges are required, so it is not fully plug-and-play like the DIY series. It usually sells for about $1,500 to $1,650.

What You Need Before You Buy

  • A vacuum pump and gauges, per the listing, or an HVAC technician who has them.
  • A dedicated 115V circuit, sized per the manual.
  • A spot for the outdoor unit; a 16 ft installation kit is included.
  • The right size. 12,000 BTU is a common size for one large room; see our sizing guide before you buy.

Installation, Climate and Shipping

The listing lists a vacuum pump and gauges as installation requirements. That means most homeowners will want an HVAC technician, unlike the MRCOOL DIY series with pre-charged quick-connect lines.

The listing gives a minimum cooling temperature of 5°F. The listing does not clearly state a minimum heating temperature, so ask the seller or check the manual if you live somewhere with hard winters. Heating output drops as it gets colder outside. If your winters go well below freezing, check the heating capacity at your typical low temperature before relying on it as your main heat.

On Amazon it is shipped and sold by a third-party seller (Spreetail), not Amazon.

How It Compares

MRCOOL Easy Pro MRCOOL DIY 4th Gen Cooper & Hunter MIA
Typical price $1,500–$1,650 $1,600–$1,800 $720–$800
Size 12,000 BTU, 115V 12,000 BTU, 115V 12,000 BTU, 115V
Efficiency R-454B refrigerant 22 SEER, ENERGY STAR 21.2 SEER2, ENERGY STAR
Installation Needs vacuum pump and gauges True DIY (quick-connect) Pro required
Best for Newer refrigerant, semi-DIY Installing it yourself Efficiency for the money

See my MRCOOL DIY 4th Gen and Cooper & Hunter MIA reviews.

Want to see other Mini Splits? Compare them side by side →

How I researched this: the specs above come from the seller’s Amazon listing (shipped and sold by Spreetail), not an independent test, plus a video review from MRCOOL (installation guide). Prices, seller and delivery checked November 10, 2026.

MRCOOL Easy Pro 12,000 BTU Mini Split Heat Pump

The MRCOOL Easy Pro 12,000 BTU mini split uses R-454B refrigerant but still needs a vacuum pump to install. Here is who it suits.

Product Brand: MRCOOL

Editor's Rating:
4.1

Pros

  • Newer R-454B refrigerant
  • Runs on 115V
  • Covers up to about 550 sq ft, per the listing
  • Wi-Fi control
  • 16 ft installation kit included

Cons

  • Needs a vacuum pump and gauges to install
  • Costs nearly as much as the true-DIY model
  • Sold by a third-party seller
  • 2-year compressor warranty, per the listing

Specs

Spec source: Amazon listing (seller-provided)

Capacity12,000 BTU heat pump
Voltage115V
RefrigerantR-454B
Coverageup to 550 sq ft, per the listing
Install kit16 ft
Installationvacuum pump and gauges required
ControlWi-Fi
Warranty2-year compressor, per the listing

Verdict

The Easy Pro makes sense if you want R-454B and have HVAC tools. If you want a true DIY install, the MRCOOL DIY 4th Gen is easier; if you are hiring a pro, cheaper brands do the same job.

MRCOOL Easy Pro 12,000 BTU Mini Split$1,500–$1,650 typical price
Check Price on Amazon
Share this review Facebook Pinterest

Common Questions

Is it fully DIY?
No. The listing says a vacuum pump and gauges are required.
What refrigerant does it use?
R-454B, the newer refrigerant.
Who sells it on Amazon?
A third-party seller, Spreetail.
Was this helpful?
One tap. Helps us make the site better.
Only used to answer you. Never shown, shared or added to any mailing list.
🔒 No name needed. Email only if you want a reply.
Thanks! We read every message.